- ページ 2

セキュリティシステム DSC IMPASSAのPDF クイック・スタート・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。DSC IMPASSA 2 ページ。 Self-contained 2-way wireless security system
DSC IMPASSA にも：プログラミング・マニュアル (5 ページ)

ページを印刷する

6. Power Up the System

Apply power by plugging in the transformer.

7. Enrol Wireless Devices

Using the quick enrol feature found in section [898], wireless devices can be

enrolled into the IMPASSA system easily.

8. Template Programming

The functions required for basic operation of the IMPASSA system can be

configured (4-digit code) quickly through the use of template programming in

section [899]. Code prompts exist for pre-defined zone definitions, reporting

code formats, communication call directions and DLS setup. Once the code

has been programmed, you will be prompted to enter the monitoring station

telephone number and account code, DLS access code, entry and exit

delays, and the installer code.

9. Perform Placement Testing

The proposed placement of each wireless device should be tested before it is

mounted by entering section [904]-[907]. Testing the signal strength between

IMPASSA and the wireless devices can be accomplished in a group (global

placement test) or individuals.

10. Cellular Configuration

a. Prior to system installation, ensure the SIM card has been activated

with Connect24 (C24 Communications)

b. Configure the communications phone numbers in section [301]-[303]

and [305] to the desired configuration

c. Confirm the cellular communicator module by programming panel

section [382] option [5] as ON

d. Confirm panel section [401] option [1] as ON in order to perform

DLS sessions through cellular

panels, keypads & modules

For product information

www.dsc.com

Product specifications and availability subject to change without

notice. Certain product names mentioned herein may be trade

names and/or registered trademarks of other companies.