- ページ 6

セキュリティシステム DSC PC1550のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DSC PC1550 12 ページ。 4 digit master code
DSC PC1550 にも：取扱説明書 (17 ページ), 取扱説明書 (17 ページ), 取扱説明書 (17 ページ), 取扱説明書 (9 ページ), 取扱説明書 (17 ページ)

ページを印刷する

5.......... Smoke Detector Circuit Trouble

6.......... Loss of Time on System Clock

Program Security Codes:

Code] to enter in programing mode for codes. As soon as this command is

entered, the "Memory" , "Bypass" and "Trouble" light will begin to flash. The zone

lights are used to indicate the program status of the 6 security codes (light off-

code is not programmed ; light on - code is programmed ; light flashing - this

code is being programmed). Zone 1=Master code . Select a code by pressing a

key from 1 to 6 (the coresponding zone-light will start to flash). Enter the [4

digit] New-code. Press [#] to return to ready mode.

when an error is made in entering code, then enter code again.

to return to ready state after using [*] commands.

QUICK-ARM FEATURE

may be armed simply by entering [*][0] instead of a 4 digit code. The [*][0]

command will not disarm the panel.

Enter [*][6][Master Code][4] to turn ON and OFF the Ouick-Arm feature. When

the command is entered, the keypad will beep 3 times if the feature is being

enabled and will sound one long beep if the feature is being disabled

Press [#] to return to Ready.

QUICK EXIT OPTION

exit with the system armed without affecting its current armed status.

Pressing [*][0] gives you 2 minutes to exit if you have already armed the system.

This is useful if you want to exit while preserving the protection for someone left

on the premises. Once you have exited, the system will be armed as before. If

the zone is open after 2 minutes or there has been more than one exit, the pre-

alert will sound.

DOOR CHlME FEATURE

disarmed, to provide a tone from the keypad each time a door or window is

opened or closed. The doors and windows which will provide this indication are

programmed by your installer.

Enter [*][6][Master Code][6] to turn the door chime feature ON and OFF. When

the command is entered, the keypad will beep 3 times if the feature is being

enabled and will sound one long beep if the feature is being disabled.

ALARM TEST

Enter [*][6][Masler Code][8] for a 2 second test of the keypad

lights, keypad sounder and alarm bells.

Press [*][5], then enter [Master

Press [#]....

When the Quick-Arm feature is enabled, the panel

This feature, if selected by your installer, allows one

The door chime feature is used, while the panel is