- ページ 14

照明器具 Anslut 422-180のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Anslut 422-180 16 ページ。 Lamp post

ENGLISH

Read the user instructions carefully before use.

Save them for future reference.

• Check that the power supply is disconnected before installation and servicing.

• When the lamp is switched on, the temperature in the bulb gradually

increases. Do not touch the bulb when it is on or has been switched off but not

cooled sufficiently.

• When the bulb needs to be replaced, turn off the lamp and wait until it has

cooled sufficiently (see below).

• The bulb output must never exceed the stated output (see Technical data).

• If the lamp shade is damaged, it must be replaced as soon as possible. Do not

use the lamp without a lamp shade.

• Do not look directly into a bulb when the lamp is switched on.

• Make sure the lamp is properly earthed.

• Use min. 1 mm² power supply cables of type H05RN-F.

• Connect the cables to the double pole switch.

Electrical safety

New installations and extensions to existing systems must always be performed by

a qualified electrician. If you have the necessary experience and knowledge, you

may replace switches and wall sockets, fit plugs, extension cords and lamp holders.

If not, you should contact an electrician. Improper installation may result in electric

shock or fire.

Rated voltage

Safety class

Protection rating

Base

Output

Wymiary

Dimension

User instructions for

lamp post

230 V/50 Hz

IP44

Max. 3 x 100 W

Wys 2,3 m

H2,3m

E27