- ページ 13

計測機器 Attonic AD-FG50のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Attonic AD-FG50 20 ページ。 Digital force gauge

7-11.Set buzzer　BP　(Initial Setting: ON)

・Set whether to sound the buzzer or not.

　The buzzer gives a warning during the main body operation or various settings.

　When the buzzer sound is annoying, you can turn it off to silence the sound.

* You can switch ON / OFF repeatedly by pressing the "DAT" switch.

* Short press the "FUN" switch to confirm the setting. Next is the setting for backlight.

* The following is a list of buzzer sounds.

Action

Overload

Comparator　ＨＩ

Comparator　ＬＯ

Switch operation

7-12.Set backlight　BL　(Initial Setting: OFF）

・Turn the backlight ON / OFF.

Turn on the backlight when using in a dark place. The backlight will brighten the screen and make it easier to see.

* When the backlight is ON, it consumes a lot of battery power and shortens the usage time.

* You can switch ON / OFF repeatedly by pressing the "DAT" switch.

* Short press the "FUN" switch to confirm the setting. Next is the setting for polarity.

7-13.Set polarity　IN　(Initial Setting: OFF）

・When OFF, compression side is set to + and tension side is set to -, but when ON, compression side is set to -

and tension side is set to +.

* You can switch ON / OFF repeatedly by pressing the "DAT" switch.

* Short press the "FUN" switch to confirm the setting. Next is the setting for reset to initial setting.

The display changes every time

the "DAT" switch is pressed.

Sound

Continuous sound

Intermittent sound (fast)

Intermittent sound (slow)

Short sound

The display changes every time

the "DAT" switch is pressed.

The display changes every time

the "DAT" switch is pressed.

The way to stop buzzer

Remove the load and press "RES" switch.