- ページ 11
防犯カメラ ATV BHR212MRのPDF マニュアルをオンラインで閲覧またはダウンロードできます。ATV BHR212MR 16 ページ。 600tv lines super high resolution color camera
<WHITE BALANCE>
Press the [LEFT] or [RIGHT] button to access the "WHITE BALANCE" mode
1) WB MODE
- ATW
- AWC
- MANUAL
RED CONT
BLUE CONT
- INDOOR
- OUTDOOR
2) PUSH AUTO
3) RETURN
<DAY/NIGHT>
Press the [LEFT] or [RIGHT] button to access the "DAY/NIGHT" mode
(NOTE: colour / monochrome).
1) D/N MODE
- AUTO
- DAY
- NIGHT
- EXT
2) AUTO LEVEL
3) FILTER DLY
This mode can be used within the colour temperature range
1800°K ~ 10500°K
Please press the [LEFT] or [RIGHT] button in the PUSH
AUTO mode while the camera is directed at a piece of while
paper to obtain the optimum state under current illumination.
If the environment including the light source is
changed, you have to adjust the White balance again.
Manual mode. User can change R and B Gain manually.
Adjust Red Gain Value (0 ~ 127)
(Can only be adjusted whilst in manual mode).
Adjust BLUE Gain Value (0 ~ 127)
(Can only be adjusted whilst in manual mode).
Set the colour temperature to 3200°K
Set the colour temperature to 6300°K
When it is AWC, OFF to PUSH can be selected.
Return to MAIN MENU.
AUTO, DAY, NIGHT, EXT can be selected.
Automatically changes to the appropriate mode for day-time
or night-time (NB: note that the camera and IR LEDS are
NOT synchronized – LEDS operate via photocell and the
camera switches by AGC so there may be an undesirable
delay)
Colour images are displayed only.
Monochrome images are displayed only.
Automatically changes to the appropriate mode for day-time
(colour) or night-time (monochrome). (Note that the camera
and IR LEDS ARE synchronized via the photocell e.g. LED's
and IR cut filter operate at the same time)
When D/N MODE is set to AUTO, the 0 to 3 values can be
selected.
(AGC LOW : 0 AGC MID : 0 ~1 AGC HIGH : 0 ~3)
When set to AUTO, 4 to 10 can be selected. Note that this
function does not work when AGC is OFF.
(Adjusts the delay time in seconds when changing from
colour to B/W and vice versa).
11
.