- ページ 8

リモコン AIRTRONICS M11XのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AIRTRONICS M11X 13 ページ。 2.4ghz digital high response system

usage precautions

Please observe the following receiver precautions when installing and using your new Airtronics M11X FHSS 2.4GHz radio

control system.

The 2.4GHz frequency band may be used by other devices, or other devices in the immediate area may cause interference on

the same frequency band. Always before use, conduct a bench test to ensure that the servos operate properly. Also, conduct

The response speed of the receiver can be affected if used where multiple 2.4GHz radio controllers are being use, therefore,

If the 2.4GHz frequency band is saturated (too many radio controllers on at once), as a safety precaution, the radio control

system may not bind. This ensures that your radio control system does not get hit by interference. Once the frequencies have

been cleared, or the saturation level has dropped, your radio control system should be able to bind without any problems.

transmitter OFF. It can be dangerous if you activate the components in reverse order as the servos may start up inadvertantly.

your model.

The transmitter's antenna is delicate. Handle it with care.

Before use, the transmitter antenna should be moved in the fully upright position. After use, to prevent the chance of damaging

the antenna, the antenna should be moved into the horizontal stowed position.

The receiver antenna consists of a coaxial cable and a reception wire (the thin tip at the end of the coaxial cable). When you

mount the receiver antenna, do not bend the reception wire. Reception performance decreases if the reception wire is bent.

antenna wire.

accutely, or repeatedly bend it, or the antenna core can be damaged.

The antenna wire should be installed into a vertical plastic tube per your particular model's assembly instructions. Keep the

When installing the receiver, avoid contact with any carbon or metal chassis components.

and possibly result in runaway operation or damage to your model.

possibly result in runaway operation with damag to your model vehicle.

The manufacturer disclaims all responsibility for damages resulting from use of components other than genuine Airtronics

components.

Page 8