コントローラー Auber Instruments AW-SYL-2352のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Auber Instruments AW-SYL-2352 4 ページ。

ページを印刷する

AUBER INSTRUMENTS

Instruction Manual

Supplementary User Guide for Wi-Fi Connectivity of AW-SYL-2352

Caution

• This document is a supplementary user guide for the Wi-Fi enabled AW-

SYL-2352.

• This document only covers the Wi-Fi connectivity related topics. Please

refer to the user's manual for the basic operations of the SYL-2352 PID

controllers.

• AW-SYL-2352 is installed with Auber's 2

requires 2.4 GHz Wi-Fi networks and should be used with the AuberWifi

app.

1. Front Panel of AW-SYL-2352

Figure 1. The front panel of an AW-SYL-2352 controller.

The Wi-Fi status indicator is a blue LED indicator located on the top-right

corner of the display window.

2. Getting Started

2.1. How to Identify the Status of the Wi-Fi Module

The Wi-Fi Indicator. It is a blue LED indicator located on the top-right

corner of the display window. This indicator should light up after the

device is powered on.

Connection Status. There are three connection status of the Wi-Fi

module:

Pairing. The blue light blinks rapidly (about 4 times per second).

The Wi-Fi module is the pairing-mode, and it should generate a 2.4

GHz Wi-Fi band named as "AuberWifi_" and followed by 12

characters consisted of letters and numbers. This is the MAC

address of the Wi-Fi module.

Connecting. The blue light blinks slowly (about 1 time per second).

The Wi-Fi module is trying to connect to the Wi-Fi signal it is

instructed to connect to. This can happen right after a user tries to

2022.10

Wi-Fi Module Firmware v1.0.7

Document version 1.0 (Oct 4th, 2022)

generation Wi-Fi module, which

Wi-Fi

Indicator

(blue)

add the device to the AuberWiFi app, and it can also happen when

the device has lost the Wi-Fi connection if the Wi-Fi signal is weak

or no long exists.

Connected. The blue light stays on solid. The Wi-Fi module is

connected to the Wi-Fi signal that it is instructed to connect to.

When you receive a new AW-SYL-2352 controller and power it up for the

first time, the blue indicator should blink rapidly. If the blue indicator is

not blinking rapidly, please see the next section for how to reset the Wi-

Fi module to paring mode.

2.2. How to Reset the Wi-Fi Module to Pairing Mode

Increase the current value of parameter COOL by "4" to reset the Wi-Fi

module to pairing mode. This action will only reset the Wi-Fi module and

it will NOT alter the existing value of the COOL parameter.

Here is a step-by-step instruction of how to do it on the device:

Press and hold the SET key for 2 seconds to bring up the

parameter menu.

Keep on short-pressing the SET key to scroll down the parameter

list till you see COOL on the top LED window. The value on the

bottom LED window is the current value of the COOL. By factory

default, this value should be 10. The dot in the lower-right corner

should be blinking rapidly.

Use the UP arrow key to increase the value by 4 and press the

SET key to confirm the change. In this example, increase the value

to "14" and press SET key to confirm and go to the next parameter.

You can press the A/M key and then press the SET key to exit the

menu. Or, you can keep on pressing the SET key till you exit the

menu. Or, don't touch any key for 10 seconds to let the device

returns to the normal display mode automatically.

Now, the blue Wi-Fi status indicator should start blinking rapidly

and the Wi-Fi module should be in pairing mode. If you use check

the available Wi-Fi signals, you should see a signal called

"AuberWifi_xxxxxxxxxxxx".

WiFi

SET

COOL

AL1

AL2

1 0.

A-M

O UT

Figure 2. Reset the Wi-Fi module by increasing the COOL value by 4.

WWW.AUBERINS.COM

WiFi

COOL

SET

AL1

AL2

1 4.

A-M

O UT

P1/4