- ページ 13
アダプター Anywire ASLINKER BL2LN87SB-02DS-CC20のPDF システム製品マニュアルをオンラインで閲覧またはダウンロードできます。Anywire ASLINKER BL2LN87SB-02DS-CC20 20 ページ。
ページを印刷する■Power supply line disconnection information
This parameter is used to check power supply line information when disconnection is detected.
Variable
0
1
Disconnection of IN0 only
Disconnection of IN1 only
2
3
Disconnection of both IN0 and IN1
■Signal line disconnection information
This parameter is used to check signal line information when disconnection is detected.
Variable
0
1
Disconnection of IN0 only
2
Disconnection of IN1 only
Disconnection of both IN0 and IN1
3
■Signal line disconnection clear command
This parameter is used to clear a signal line disconnection error.
*
The signal line disconnection clear command is active only when the error signal is turned from OFF to ON.
Variable
0
Clear command OFF
1
Clear command ON
*
When power is supplied, this unit will always start with the "0" setting.
■Short-circuit noti cation cancel command
This parameter is used to clear a short-circuit error when short-circuit noti cation cancel setting (equipment parameter 12) is
"manual restoration."
*
After execution of the short-circuit noti cation cancel command, set this parameter to OFF.
Otherwise, operation of the short-circuit noti cation cancel setting (equipment parameter 12) is the same as that of the
automatic restoration setting.
Variable
Cancel command OFF
0
Cancel command ON
1
*
When power is supplied, this unit will always start with the "0" setting.
Description
Normal
[Equipment parameter 4]
Description
Normal
Description
Factory setting: 0
Description
Factory setting: 0
-BL2LN87SB02D*CC20 13/20-
[Equipment parameter 3]
Factory setting: 0
*
For read only
Factory setting: 0
[Equipment parameter 6]
[Equipment parameter 14]
*
For read only