- ページ 7
ペイントスプレー AirVerter AV-096のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AirVerter AV-096 12 ページ。 Hvlp paint spray system
ページを印刷するNEEDLE, NOZZLE AND AIR CAP SELECTION GUIDE
Select the proper fluid nozzle and needle for the material to be sprayed. Needle and nozzle are a
matched set - machined to act as a valve. Replace the Needle and Nozzle when the Needle protrudes
approximately 3/32" beyond the Nozzle.
Needle
Finish
Nozzle
Ultra Fine Finish
Excellent Finish
Good Production
Good Finish
Higher Production
Excellent Finish
Good Production
Best Finish
High Production
Good Finish
Higher Production
*Measured at the gun handle
Nozzle Size Expressed as a millimeter = 1 millimeter = .040 (approximately)
0.7 = .028
1.0 = .040
Air Cap sizes do not have a direct relationship to Nozzle measurements listed above.
DO NOT OPERATE SPRAY GUNS WITHOUT PERSONAL SAFETY EQUIPMENT
®
AirVerter
Model 96 HVLP Paint Spray System
Air
Cap
Ultra Fine Finish With Thin Coatings on Small Parts
Ultra Fine Touch Up
0.7
5
Specialty Applications/Wood Working
Water-Based Lacquers, Urethanes
Automotive Base or Clear Coat
Top Coats For Automotive, Aviation and Marine Use
Wood: Lacquers, Stains, Polyurethanes, Varnishes
1.0
5
Thin Specialty Coatings With Low Mil Build and Fine
Finish Requirements
Water-Based Coatings
Higher Production For The Same Applications As
Above
1.2
10
Fine Finish With Gloss Alkyd Enamel Primers and
Sealers For Automotive, Aviation and Marine
Water-Based Coatings
General Industrial Finishing
Zinc-Rich Primers, Water-Based Primers, Flat &
Semi-Gloss Alkyd Enamels & Polyurethanes
Industrial, Marine, Top Coats, Chlorinated Alkyd
1.4
12
Enamels, Acrylic Enamels, and Latex
Best with Heavy Primers
CARC
High Production
1.7
17
Industrial Marine Primers, High Build Primers, Steel
Structures Latex
CARC
2.0
20
Industrial Finish Coatings
Latex, Stripper, Oil
1.2 = .048
Uses or Coating Type
1.4 = .056
Compressor
Air Pressure*
45- 50
45-55
55-65
65-75
75-85
85-90
1.7 = .067
2.0 = .080
7