- ページ 12

会議システム Danish Interpretation Systems DCS 6000のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Danish Interpretation Systems DCS 6000 19 ページ。 Digital conference system
Danish Interpretation Systems DCS 6000 にも：ユーザーマニュアル (10 ページ), ユーザーマニュアル (14 ページ), ユーザーマニュアル (14 ページ), ユーザーマニュアル (13 ページ), ユーザーマニュアル (18 ページ), ユーザーマニュアル (14 ページ)

Danish Interpretation Systems

System design

There are no settings to be done on the EX 6010

Extension Unit.

However it is important to observe, that the unit is

only repeating one of the chains on the CU 6105 or CU

6110 Central Unit.

So when designing a system to incorporate EX 6010

Extension units, bare in mind, that as the EX 6010

Extension Unit is repeating only one of the two

outputs on CU 6105 or one of the four outputs on CU

When connecting the EX 6010 Extension Units to the

Figure 0-A

Repeated Chain connection

CU 6105 or CU 6110, the first EX is connected to the

'Loop through' connector.

The next EX 6010 Extension units can be connected to

either the other 'Loop through' connector or to one of

6110, the max. number of languages configured on

the four outputs (1, 2, 3 and 4) is totally max. 16.

If more languages are required, Interpreter sets for

those languages have to be connected either to

another EX 6010 Extension Unit, which is connected

to another of the four chains on the CU 6110, or

directly to one other of the four chains on a CU 6110.

the 'Repeated out' connectors. If using the 'Repeated'

outputs two more EX 6010 Extension units (or RP

6004 Repeaters) can be connected extending the

maximum cable length in one chain up to 680 m. The

above schematic is showing the connection using the

''Repeated chains' connectors.

User Manual EX 6010 rev F.doc

User Manual