- ページ 10

会議システム Danish Interpretation Systems DCS 6000のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Danish Interpretation Systems DCS 6000 14 ページ。 Digital conference system
Danish Interpretation Systems DCS 6000 にも： ユーザーマニュアル (19 ページ), ユーザーマニュアル (10 ページ), ユーザーマニュアル (14 ページ), ユーザーマニュアル (13 ページ), ユーザーマニュアル (18 ページ), ユーザーマニュアル (14 ページ)

ページを印刷する
Danish Interpretation Systems
Self adhesive label
The following self adhesive label is given a quick overview of the channel setting. The label is attached the User
Manual. Please place the label as you wish.
0
1
Switch
0
Channel
14
15

Normal Operation

Powering up
Switch on power at the IT 6108. After powering up,
the ON LED will light up.
Check with an IR15-xx Infrared Receiver holding
in front of the 3 test LED's, that there is sound on
all the channels set to ON.
10
3
4
5
2
1
2
3
4
16
17
18
19
20
Set unused channels to "Off" position
Manual 01 18 04452, Printed in Denmark, 02/2003 CHN
6
7
8
9
A
5
6
7
8
9
21 22
23
24
Check when signal is present to the channels, that
the green LED is flashing indicating proper level to
the channel.
If the LED is not flashing the sound level present on
the Analogue Audio Line Input Connector is too
low.
If the LED is lighting constantly the sound level
present on the Analogue Audio Line Input
Connector is too high.
Operation manual
B
C
D
E
10
11 12
13
25
26
27
28
29
Off
Channel
On
F
Channel
selection