チューナー Audiomusic Systems Marktinez MTU 50のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Audiomusic Systems Marktinez MTU 50 2 ページ。 Metal stomp chromatic tuner

Thank you for purchasing stomp chromatic tuner MTU 50

Tuning Mode

: Chromatic

Tuning Range

A0 (27.5Hz) - C8 (4186.00Hz)

Tuning Way

: The signal input must be connected

Tuning Tolerance:

0.5

Power

:6F22 battery, or 9V DC

Dimension

:125mm×73.8mm×40mm

Weight

353g

Attachment

Manual, Battery

Install a battery, or link a AC-DC 9V connector. Please pay much attention to polarity.

2 Link the input, and the tuner automatically turns on. When the tuner is on, the singal can't get

through the output. When turn off the tuner by pressing the ON / OFF button, the signal will pass

through the output.

3 Play a single note from your instrument, the note name will appear in the tuner screen. The screen

color will change, and the tuning needle will move.

The screen turns green, the center needle appears, both triangles besides the note name appear: in tune.

The screen is white, the left tuning needles appear, the triangle at the left side of the note name appears:

flat note

The screen is white, the right tuning needles apprear, the triangle at the right side of the note name

appears: sharp note.

4 When disconnect the Input, the tuner will turn off automatically.

MTU 50

Metal Stomp Chromatic Tuner

Operation and Function

Specification

How to Use

1. ON / OFF

2. Screen: a. Note Name

b. Tuning Meter and Calibration

3. Input

4. Output

5. 9V DC Input

6. 9V DC Output

7. Battery Compartment

www.audiomusic.es

User manual