- ページ 2
セキュリティセンサー DANLERS SILVAIR MESH-HBWD DALIのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。DANLERS SILVAIR MESH-HBWD DALI 2 ページ。 Ceiling high bay (wide) passive infra red (pir) occupancy detector & photocell for dali ballasts
ページを印刷するMESH-HBWD DALI
Ceiling High Bay (Wide) Passive Infra Red (PIR)
Occupancy Detector & Photocell for DALI ballasts
Input: 100-240 Vac 50/60Hz
PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLING THE PRODUCT
NOTE: MESH-
HBWD DALI
is compatible with any qualifi ed Bluetooth mesh components and commissioning tools.
We recommend Silvair Commissioning as a reliable solution.
DIMENSIONS
plan
HALL EFFECT / FACTORY RESET:
This function allows a reset to be carried out in order to restore the default
factory settings.
Performing a factory reset restores the device to its default (factory) settings
and removes it from a Bluetooth mesh network.
A factory reset should be used as a last resort, when you cannot
communicate with the device via the app. A factory reset deletes all settings
and will require the device to be recommissioned.
TO REPROVISION:
Place a small magnet on the site of the Reset / Hall effect sensor (see
diagram 4 below). To trigger the reset the magnet must be held in position
for 5 seconds.
RESET ZONE
(behind moulding). Magnet
to be placed over the Reset
Sticker for reprovisioning.
STATUS LED BLINKING SEQUENCE:
MESH-HBWD DALI Unprovisioned:
MESH-HBWD DALI Provisioned:
Factory Reset:
Factory Reset (initial burst):
MESH package received:
Attention (from network):
DANLERS Limited, Vincients Road, CHIPPENHAM, Wiltshire, SN14 6NQ, UK.
Telephone: +44 (0)1249 443377 Fax: +44 (0)1249 443388 E-mail: [email protected]
www.danlers.co.uk
Company Registered Number 2570169 VAT Registration Number 543 5491 38
23/08/19
side
90
90
63
76
DIAGRAM 3
STATUS LED.
Flashes rapidly when
unprovisioned. Flashes
slowly when provisioned.
DIAGRAM 4
30ms ON
300ms OFF
15ms ON
2000ms OFF
500ms ON
1000ms OFF
100ms ON
1000ms OFF
30ms ON
50ms OFF
500ms ON
500ms OFF
INS439 MESH-HBWD DALI (Issue 01)