- ページ 3
コントロールユニット AudioStak ProSwitch PRSW-RCA-PCBのPDF マニュアルと設置マニュアルをオンラインで閲覧またはダウンロードできます。AudioStak ProSwitch PRSW-RCA-PCB 20 ページ。
ページを印刷する
ProSwitch Modules
ProSwitch systems are comprised of four types of modules:
1.
Main Module (PRSW-MCU-PCB): Main Modules read button presses and communicate with other
Main Modules in the system. They control and synchronize ADD-ON signal modules. Each set of four
components or speakers to be switched requires one Main Module.
2.
High Level ADD-ON Module (PRSW-4HL-PCB): High Level Modules (4H) switch high level signals up to
7A MAX (196 Watts for a typical 4 ohm speaker), such as speakers, head unit outputs or amplifier
outputs. Each module switches L+/L-, R+/R- for four positions. High Level Modules can be ordered
with MTA connectors which use a specialized crimp tool to connect wiring, or with simple screw
terminal blocks which only require a screwdriver to use.
3.
Low Level RCA ADD-ON Module (PRSW-RCA-PCB): Low Level Modules (4L) switch low level RCA
signals, such as amplifier inputs or head unit RCA outputs. Each module switches Left/Right RCA signals
for four positions.
4.
High Current Mono ADD-ON Module (PRSW-MONO-PCB): High Current Modules (HC) switch high
current mono signals up to 16A MAX (1024 Watts for a typical 4 ohm speaker), such as sub woofers and
high-power amplifiers. Each module switches +/- mono signal for four positions.
For each set of four components or speakers, one Main Module is used, plus ADD-ON Modules as required to
switch all associated signals. For example, a set of four speakers would require one Main Module and one High
Level Module. A set of four 4-channel amplifiers would require one Main Module, two Low level Modules and
two High Level Modules.
Additional modules are available to add to ProSwitch systems to provide advanced functions, such as Feature
System Module PRSW-FEAT-PCB, which allows four complete system settings to be programmed and then
recalled at the touch of a single button.
Overview – ProSwitch Modules