- ページ 13

カースピーカー Audiotec Fischer MATCH UP S4MB-CTRのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Audiotec Fischer MATCH UP S4MB-CTR 17 ページ。 Upgrade speaker systems for mercedes vehicles

ページを印刷する

1. Installation

Installation of the UP X4MB-FRT

The UP X4MB-FRT is a 2-way coaxial system,

which will be installed in the original midrange

speaker position. After you have dismantled the

cover, you can remove the original midrange speak-

er. Then connect the UP X4MB-FRT to the original

speaker cable harness and insert it into the original

mounting position (see figure page 12, refer to item

"Installation of the UP C42MB-FRT").

Installation of the UP S4MB-CTR / UP S4MB-SUR

The center speaker UP S4MB-CTR and the sur-

round speakers are fullrange speakers, which will

be mounted in the original speaker locations. After

you have dismantled the cover, you can remove

the original fullrange sepaker. Then connect the

MATCH UP S4MB-CTR / UP S4MB-SUR to the

original speaker cable and insert it into the original

mounting position.

Important: The center speaker is equipped with

two equal connection terminals. For audio transmis-

sion only one terminal is required. If there is no mu-

sic-playing center speaker or if there is an additional

amplifier as recommended, use the enclosed cable

to connect the signal source. The other terminal

must only be connected if the car is equipped with

a SOS emergency call function ex works. Please

refer to the user manual of the vehicle.

Installation of the UP S4MB-SUR / UP S4MB-CTR:

Important: Make sure that all anchoring supports of

the speaker are correctly engaged.

Installation of the UP W8MB-S4

For the installation of the front subwoofers you have

to remove the splashback cover in the front footwell.

Then connect the MATCH UP W8MB-S4 subwoofer

to the original speaker cable harness, insert it into

the original mounting position and fix it with the

screw nuts.

Installation of the UP W8MB-S4:

The enclosed universal connection cables with

50 cm / 1.64´ and 1.5 m / 4.92´ length can be used

e.g. for connecting an optional amplifier.