- ページ 5

録音機器 Audiotrak AUDIOTRAK MAYA EX5 CEのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Audiotrak AUDIOTRAK MAYA EX5 CE 12 ページ。 Innovative external 5.1 surround audio solution

ページを印刷する

AUDIOTRAK

On the left side of the unit, you can find the Headphone & Optical Out connector. You can use this

connector to connect MAYA EX5

Miniplug or Miniplug to Miniplug optical cable. Alternatively the same connector can be used as

output for headphones featuring the built-in headphone amplifier.

The lower side features from right to left the Digital I/O to connect MAYA EX5

devices using coaxial S/PDIF cables, the Analog Out section with its 6 output channels and the

Analog In section with a Line input and Mic input (featuring the built-in microphone preamp). Make

sure to connect your main analog speakers (amplified or via your HiFi system for example) to the

Front output. Use the Rear and Center/LFE outputs for surround setups.

2. Installation

System Recommendation

MAYA EX5

is a very high quality multimedia digital audio interface with many different

functions and not just a simple USB sound card. Even though MAYA EX5

much on the available CPU in your system, it is important that the computer meets the minimum

system requirements. A faster CPU, faster HDD and more memory is generally recommended.

Minimum System Requirements

Intel Pentium III 700 MHz CPU or equivalent AMD CPU on a desktop computer

Intel Pentium III 1GHz CPU or equivalent AMD CPU on a notebook computer

Windows 2000, XP operating system

one available USB port (USB 1.1 and USB 2.0 are supported)

128MB of RAM on a desktop computer

256MB of RAM on a notebook computer

CD-ROM or DVD-ROM

Hardware Installation

MAYA EX5

is simply connected to an available USB port of your computer. A separate power

supply is not required, as MAYA EX5

plugging it into your computer (switched on).

You will see one of the LEDs turning on inside the MAYA EX5

device to your computer, you should connect the MAYA EX5

devices such as headphones, speakers or mixers.

to devices with a digital S/PDIF input using a Toslink to

is a USB powered device. Simply install the hardware by

USB port of a computer

MAYA EX5

does not depend very

case. After connecting the

's in- and outputs to your external

to digital