ページを印刷する
On Windows: Open "My Computer", right-click on your SD card. Select "Format" from
o
the menu, then choose "FAT" and press start.
Editing the BatLure configuration file (a computer is needed)
1. Place the SD card in your computer and navigate to its location.
2. Open the file "batlureconfig.txt" in the top directory of the SD card, use a plain text editor like
notepad.
To get a fresh copy of "batlureconfig.txt":
a. Delete or rename the file "batlureconfig.txt" from you SD card (if there is one);
b. Place the SD card in the BatLure and turn it on;
c. After 5 seconds you can turn it off;
d. A fresh copy of "batlureconfig.txt" is placed on the SD card.
3. You can modify the file by changing the numerical values. If you use unrecognized values, a
factory set of values will be used instead.
4. When you have set the "batlureconfig.txt" according to your wanted setting, save it to the SD
card and safely remove the SD card. It is now ready to use.
Field:
Values:
time_expansion
0 or 1
track_pause
1 to 600
startup_volume
0 to 31
repeat
1 to 100
repeat_time
0 to 600
list_pause
sine_mod_time
sine_mod_volmin
Units:
off/on
Enables or disables the time expansion feature.
With this feature enabled, all files with a sample
rate below 20KHz will be played 10x faster.
seconds
Determines the pause between two files.
steps
Determines the volume level at power on.
times
Number of times to repeat a wave file (only
when the file is shorter than repeat_time)
seconds
Threshold time to decide when to repeat a wave
file.
Pause at the end of playlist, before repeating
Sine modulation period (seconds), set to 0 to
disable this feature
Sine modulation lower volume level
Explanation:
Version: 2014-11-18