メディア・コンバーター Apogee Rosetta ADのPDF データシートをオンラインで閲覧またはダウンロードできます。Apogee Rosetta AD 2 ページ。 24-bit solution series
ページを印刷するThe Apogee Rosetta AD — Specifications
Analog and A/D Converter
Parameter
Value
Units
Resolution
24
bits
Sample Rate 44.1–48, 88.2–96 kHz
±10%
Input Impedance
Ω
Pro
9K
Ω
Consumer
15K
Relative THD+N
–0.1 dBFS
–110
dB (unweighted)
–112
dB (A-weighted)
–20 dBFS
–91
dB (unweighted)
–93
dB (A-weighted)
–60 dBFS
–56
dB (unweighted)
–58
dB (A-weighted)
Dynamic range
–60 dB, Unweighted
116
dB
–60 dB, A-weighted
119
dB
Peak Spurious Component
–126
dB (max)
Group Delay (in passband)
34/Fs
seconds
Passband Ripple
±0.001
dB
Digital Filter Stopband
0.5542Fs kHz
Stop-band Attenuation
117
dB
Channel Separation
Left/right
120
dB (worst case)
Frequency Response (10 Hz–20 kHz)
Gain
±0.025
dB
Phase
< 0.01
degrees
Common-Mode Rejection Ratio
60 Hz
>> 100
dB
1 kHz
>> 80
dB
Input Level, maximum (no gain)
Professional, balanced
27
dBu
The Rosetta AD's frequency
response (shown left, Fs=48 kHz)
and Total Harmonic Distortion plus
Noise (right) show the exceptional
performance of this unit. The
Rosetta AD not only out-performs
other converters in its price range:
it out-performs converters costing
many times more. This is the
Apogee tradition.
The Apogee Rosetta AD features clean, uncluttered front and rear panels. At the rear of the unit, all interfaces are easily accessible.
The analog inputs may be balanced or unbalanced, pro or consumer levels. At standard 44.1 and 48 kHz sample rates, both AES ports
are available: at 88.2 and 96 kHz both ports are used to create 2-channel path.
The Heart of Digital Audio.
A
E
C
, 3145 Donald Douglas Loop South, Santa Monica, California 90405-3210, USA.
POGEE
LECTRONICS
ORPORATION
Telephone: +1 310/915-1000. Fax: +1 310/391-6262. Email: [email protected]
For full details and application notes on all Apogee Electronics products, visit our Web site at http://www.apogeedigital.com/
Parameter
Value
Units
Professional, unbalanced
23
dBu
Consumer, balanced
16
dBu
Consumer, unbalanced
15
dBu
Input Level, adjustment range
20
dBu
Crystal Oscillator accuracy
±50
ppm
Clock Jitter, 32kHz–106 kHz
<< 22
psec
Digital Signal Processing
UV22HR Amplitude
16 bits
–84
dB
20 bits
–108
dB
Over Detection
1–4 consecutive 0 dBFS readings
(user-definable)
System
AC line voltage
100, 120, 220, 240 vac (set internally)
Fusing 5 x 20 mm, 800mA (100–110v); 400 mA (220–240v) slow-blow
Power
15
Watts
Size (w, h, d)
19 in, 1.75 in (1U), 14.25 in
Weight
6 lb (2.7 kg)
The Specifications above, and other information provided in this
brochure, are subject to change without notice. Apogee Electronics
Corporation reserves the right to make design changes without prior
warning. Apogee, UV22, Soft Limit, AMBus, Clocked by Apogee,
Apogee Bit-Splitting and the "96k" device are trademarks or regis-
tered trademarks of Apogee Electronics Corporation. Other trade-
marks are the property of their respective owners.
Photography by David Norwood
Created by Richard Elen
Printed in U.S.A.
RosettaAD/5M/1198
The highest quality you can afford.