体重計 ADE BE 1513のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。ADE BE 1513 2 ページ。

ADE BE 1513 取扱説明書
Safety instr uctions for lithium batt eries (CR 2032/CR 2430):
1. Lithium batteries are lithium manganese cells. If you do not use the scale over a longer period,
you should take out the batteries of the device.
2. Never open the lithium battery, do not put into fire, or expose to shocks because an explosion
risk lasts or discharge of poisonous exposure to fumes might possible.
3. Never touch leaked cells with bare hands.
4. When eyes or hands are contaminated, it is essential to rinse with lots of water. You should go to
a doctor if skin or eyes are irritated.
5. Dispose cells only completely discharged or protected against polarity reversal wrapped
according to your local disposal regulation.
6. Do not expose the cells to direct solar radiation and store away from heat; otherwise, there is risk
of overheating.
7. Maintain a storage temperature of < 40°C.
Disposal of old electr ical and electr onic equipment
This symbol on the product or on its packaging indicates that this product shall
not be treated as household waste. Instead, it shall be handed over to the
applicable collection point for the recycling of electrical and electronic
equipment. For more detailed information about recycling, contact your local
city office, your household waste disposal service or the shop where you
purchased the product.
Declar ation of confor mity by the m anufactur er
These scales have been manufactured in accordance with the harmonized European standards.
They conform to the regulations of the EC-directives listed below:
-
EMC directive 2004/108/EC regarding electromagnetic compatibility
-
RoHS Directive 2011/65/EC
in the currently valid versions.
This declaration loses its validity if modifications are made to the scale without our approval.
Hamburg, May 2015
WAAGEN-SCH MITT GmbH
Hammer Steindamm 27 – 29
D-22089 Hamburg
4
Operating Manual_N_BE1513_EN_150501_REV001
4
Model Leevke / BE 1513
Instruction Manual
Directory
1. Conditions of use
....................................................... page 2
2. Commissioning
............................................................ page 2
3. Weighing function
...................................................... page 3
4. Error Messages
........................................................... page 3
5. Technical Data
............................................................. page 3
6. Warranty
......................................................................... page 3
1