- ページ 6
体重計 ADE HWZ-30のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。ADE HWZ-30 20 ページ。 Electronic counting scale
7.1
Weight window (WEIGHT)
This window has a 5-digit display to show the weight on the scale.
The arrows above the symbols indicate:
Zero position
Low battery voltage,
Net
Net weight
Stability
7.2
Unit weight window (UNIT WEIGHT)
This window shows the unit weight of a sample. This value is either entered by the user or calculated
by the scale. The weighing unit gramme is set for all scales.
An arrow indicator appears above the symbol
determine the number of units. If the unit weight is not sufficient to determine an exact number of units,
an arrow indicator appears above the symbol
In both cases, the scale continues the process. The arrows only appear to warn the user of a potential
problem.
If a preset number of units has been saved, a small arrow appears above the symbol
7.3
Count window (COUNT)
This window shows the number of units on the scale or the value of the total number of units. See
Section 6 (Operation).
An arrow indicator appears above "Memory" when a value has been entered into memory.
8.
Operation
8.1
Setting display to zero
You can press the
are performed from this point. Normally, it is only necessary if the weighing platform is unloaded.
When the zero point is reached, the "Weight" window shows an arrow indicator above "Zero".
The scale has an auto zero function to account for small deviations or accumulation of items on the
weighing platform. It is still possible that you must press
amounts of weight are displayed while the weighing platform is empty.
6
when the number of units is insufficient to accurately
key at any time to set the zero point. All weighing and counting operations
.
to reset the scale to zero if small
HWZ-190214-Rev006-UM-en