- ページ 3

体重計 ADE Klara BE 1006のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。ADE Klara BE 1006 4 ページ。

Preparation:
Open the battery cover at the bottom side at the scale and remove the battery safety strip.
Please ensure the correct polarity of the batteries
(+1-).
There is a little black push button next to the battery case (KG/LBlS1] for country specific
settings with the option to switch from KG
=
kilogram to LB
=
pound or ST
=
stone.
Please pay attention to use the scale under consideration of your country specific urit of
weight.
3. Weighing function
1.
Switch-on the scale by using the tap-an-function. For this, tap with your foot short and
forceful on the certre of the scale.
The
display indicates the signal "8888" and a few
seconds later "0.0 kg". Now the scale is ready to use.
2. Step on the centre of the scale. Remain stationary on the weighing platform and do not
hold you tight. After a few seconds, your weight will be indicating in the display.
3.
After weighing, step off the scale.
The
scale will switch-off automatically after a few
seconds.
4.
Error
Messages
"FFFF"
=
Overload
The weight exceeds the maximum capacity of 150 kg. Please
immediately remove the cri1icalload to avoid load celi damage.
"La'
Batteries are used up
Please replaoe the battery with the intended type (1 x CR 2032).
5. Technical Data
Capacity x graduation:
Dimensions:
Battery:
max. 150 kg x 100 g
300 mm x 300 mmx 18 mm
1 x CR 2032 Onduded)
Subject to techrical modifICations
6. Warranty
ADE warrants for a period of 3 years from the date of purchase that
~
will remedy any
defects due to fauty material or workmanship free of charge by repair or replacement.
When purchasing, please have the warranty coupon signed and stamped by the dealer.
When making a guarantee claim, please return the weighing scale together with the
guarantee card including the reason of complaint to your dealer.
CE-Conformity - This device features radio interference
suppression in compliance with valid EC Regulation
2004/108
3