- ページ 7

体重計 ADE M20011のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。ADE M20011 12 ページ。 Electronic column scale, class iii approved

Before cleaning make sure the scale has been disconnected from the socket.

For cleaning just use a damp cloth or common disinfection products.

Do not use any aggressive cleaning fluids.

Make sure no water or cleaning fluid penetrates the scale.

Display indication Lo

Display indication ErrL Check correct positioning of the scale (see chapter installation & use of scale)

Display indication Err

Display indication ErrP Severe failure of weighing system. Please contact your local dealer or service

Do NOT use the scale

•

If the mains adapter shows visible damages

•

If mains adapter is not working properly

•

After long storage in humid places

In those cases contact your local dealer or service partner.

Keep all original parts and pieces for an eventual sending back of the scale in order to avoid any

possible damage during transport which automatically leads to no warranty.

Disconnect all cables before transport to avoid unnecessary damages.

Warranty – Liability

ADE will repair or replace this product within a period of 2 years from date of delivery applying to

defects occurred due to poor material or workmanship (presentation of invoice is necessary). All

moveable parts – batteries, cables, mains units, rechargeable batteries etc. – are excluded. Warranty

does not include natural wear, damages caused by incorrect or negligent handling, overuse or

unsuitable or improper storage. The cost of transport will be borne by the customer should the

equipment be located anywhere other then the customer's premises. In the event of transport

damage, claims under warranty can be accepted subject to using the complete original packaging and

the equipment secured the way it was packed and secured originally. All the packaging should

therefore be retained.

Any warranty claim will be rejected if the equipment is opened by persons not authorized expressively

by ADE to do so.

Customers abroad are kindly requested to contact their local dealer for any warranty claim, customer

service and spare parts.

050100-Rev000-M20011

Cleaning, Maintenance and Re-approval

Recharge the power-pack by connecting the mains adapter to the display.

and make sure the scale is completely unloaded.

Function test does not automatically lead to `0.00´. Try zero setting key. If

display still indicates Err the scale needs calibration. Please contact your local

dealer or service partner.

partner.