- ページ 5
エンジン AUSTRALIAN MADE GREAT MATEのPDF インストールとセットアップの説明をオンラインで閲覧またはダウンロードできます。AUSTRALIAN MADE GREAT MATE 20 ページ。 Double swing gate motor kit
ページを印刷するInternal Release
Plate Engaged
Remove the motor cover. Use two 13 mm spanners to loosen the manual release nut and bolt.
Push the DC motor away from the gears to disengage the motor and allow the gate drive arm
to move by hand.
Pull the DC motor back towards the gears to engage. Ensure the DC motor gear has meshed
with the drive gear. Fully tighten the Internal Release Bolt and check the gears are engaged.
Swing Arm
DOUBLE GATE
INSTALLATION AND SET UP
INSTRUCTIONS
Internal Manual Release
DC Motor
Internal Release
Bolt Engaged
External Manual Release
Drive Arm
© 2012 G Force Automatic Gates All Rights Reserved
Internal Release
Plate Disengaged
Swing Arm
Use a 19 mm spanner to undo the two bolts. Fold
the swing arm back and tie up to the bottom of
the gate. Screw the two bolts back into the Drive
Arm.
Internal Release
Bolt Disengaged
Drive Arm