- ページ 7

クロスオーバー Australion monitor AMIS23XのPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。Australion monitor AMIS23X 10 ページ。 Stereo 2-way/mono 3-way crossover

8. Channel 2 Input XLR

This input accepts a balanced line level signal in 2 way stereo mode. This

input is not used in 3 way mono mode.

9. Channel 2 Input Jack

This input accepts a balanced line level signal in 2 way stereo mode. This

input is not used in 3 way mono mode.

10. Channel 1 High output XLR

Channel 1 XLR high frequency output. This is not used in Mono 3 way

mode.

11. Channel 1 High output Jack

Channel 1 Jack high frequency output. This is not used in Mono 3 way

mode.

12. Hi Phase.

This switch reverses the polarity of the high frequency output.

13. Channel 1 Low output XLR

Channel 1 XLR low frequency output/ Mono 3 way Lo frequency output.

14. Channel 1 Low output Jack

Channel 1 Jack low frequency output/ Mono 3 way Lo frequency output.

15. CD Boost Switch.

This switches in a constant directivity horn equalization circuit. This is used

with horns that require a high frequency boost. This boost is +3 dB @ 3.5kHz

rising 6dB per octave to 22.5kHz. If constant directivity horn equalization is

required engage this switch. Consult your horn manufacturer to determine

if this equalization is required.

16. Channel 1 Input XLR

This input accepts a balanced line level signal in 1 way stereo mode. This

input is the input used in 3 way mono mode.

17. Channel 1 Input Jack

This input accepts a balanced line level signal in 2 way stereo mode. This

input is the input used in 3 way mono mode.

18. Voltage Selector Switch

This switches the correct voltage for your part of the world.