ページを印刷するRead instruction manual first! Remove battery pack from the tool before
making adjustments or assembling accessories.
1. Battery pack not charged.
2. Battery pack not installed properly.
3. Battery pack temperature is too hot or cold for operation.
4. Burned out switch.
1. If equipped, check battery charge condition lights for charge status. Charge
battery if needed.
2. Confirm battery is locked and secured to the tool.
3. Let battery sit a few minutes or until it reaches normal operating temperature.
4. Replace the switch provided by ADEDAD.
1. Charger not plugged into outlet.
2. Battery pack not completely inserted into charger.
1. Confirm charger is plugged into outlet.
2. Confirm battery pack is inserted into charger completely.
14