- ページ 10

ツール Gage Bilt GB745SHのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Gage Bilt GB745SH 14 ページ。 Installation tool

HEAD

Remove nose assembly from tool before attempting disassembly of head cylinder (745366).

Remove end cap (745816). Push against threaded end of piston (745310) to slide it out of head cylinder (745366). Be careful not to

damage threads or cause burrs on polished piston rod surface.

WARNING:

Dispose of Hydraulic Oil in accordance with applicable regulations.

The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite #242 and torque the

four socket-head cap screws (400061) uniformly to 40 inch lbs. to prevent leakage around the gasket.

753101 - NOSE FITTING

480124 - NUT

204304 - SWIVEL ASSEMBLY

401080 - BACK-UP RING

S/N: 1033 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

745366 - HEAD CYLINDER

401092 - BACK-UP RING

480101 - PINTAIL TUBE

480125 - RETAINING NUT STOP

403805 - O'RING

745305 - GLAND

S829 - O'RING

S832 - O'RING

745124 - GASKET

700326 - HANDLE-SPLIT

704312

ACTUATOR LEVER ASS'Y

704130 - AIR ACTUATOR ASSY

S1181 - BARBED FITTING

A-144 - HOSE CLAMP

204304 - SWIVEL ASSEMBLY (2)

(INCLUDES 401080 & 403764)

403764 - O'RING

745310 - PISTON

403815 - O'RING

401119 - BACK-UP RING

402482 - BUTTON HEAD SCREW (2)

S572 - STAT-O-SEAL (2)

A-261 - O'RING

704311 - AIR LINE

402482 - BUTT0N HEAD CAP SCREW

S572 - STAT-O-SEAL

756120 - DEFLECTOR

A-820 - O'RING

405889 - O'RING

403846 - O'RING

401119 - BACK-UP RING

A-663 - HANGER

400061 - SOCKET HEAD CAP SCREW

A-1282 - HYDRAULIC HOSE (2)

703561 - HOSE GUARD (NOT SHOWN)

S572 - STAT-O-SEAL

745303 - MANIFOLD - HANDLE

745816 - END CAP

401105 - BACK-UP RING

A-144 - HOSE CLAMP

S1181 - BARBED FITTING

402482

BUTT0N HEAD

CAP SCREW

7/12 REV. 8/14