ページを印刷するUse A6S
Hinge
Figure 1
1
Take A6S from the packing container.Align the screws on backrest hinge to the screw holes and body
holes, tighten screws (see Figure 1) and stick saddle to frame(see Figure 2). Pull outward and rotate the
index plunger (see Figure 3) and get the mount stuck and loosen the index plunger (see Figure 4); rotate
the armrests to horizontal position(see Figure 5 - arrow). Pull outward and rotate the index plunger and
release it when a click sound is heard.
Screw
2
Based on rider's habit, place the handlebar controller in the most appropriate position, tighten the
screws and fix handlebar controller (see Figure 6), Remove the adjustable operating arm from the foam
box, align the mounting holes (see Figure 7), tighten the screws and install the adjustable operating arm.
Then the installation of the body is finished (see Figure 8).
The handlebar controller can be
placed in right or left.
1.
Loosen the screws with hex wrench (see right
Figure) and dismantle the handlebar controller.
2.
Place the handlebar controller in right or left
based on rider's habit.
3.
Tighten the screws and fasten the handlebar
controller.
Backrest
Screw
Screw hole
Handlebar
controller
Mounting hole
Figure 6
Cushion
Figure 2
Adjustable
operating arm
Figure 7
Screw
Right installation
- 03 -
Index plunger
Figure 3
Figure 5
Screw
Adjustable
operating arm
Mounting hole
Handlebar
controller
Mounting hole
Left installation
Figure 4
Figure 8
Mounting
hole
Screw