ページを印刷するGet Started
R6 provides riders with three different riding modes.
1.Electricity-assisted mode
Set right the head, fold kickstand and fasten frame. Adjust bike head and saddle position to ensure a
comfortable riding experience. Find the power switch in the one side of the batter, start it and hold the handle.
First sit on the saddle and step on the pedals one foot by one foot. When riders are ready to ride it, they can
push the accelerator in the right handle to accelerate.
Power switch
Open the power switch
Starting is completed.
2. Man-powered mode
Set right the head, fold kickstand and fasten frame. Adjust bike head and saddle position to ensure a comfortable
riding experience. Find the power switch in the one side of the battery, start it and hold the handle. First sit on the
saddle and step on the pedals one foot by one foot. Rides can pedal it to go forward.
3. Power-assisted mode
Turn on the power switch. Power sensor can sense the rotation, and then give signal to the controller when the
riding ring exceeds three rings, so that power-assisted mode is activated. According to different riders' force,
the level of power assistance changes. When braking, it is out of power-assisted mode. If pedals reverse, it will
realize a faster exit of power-assisted mode. The power-assisted mode is to make riding easier.
R6S does not support pure electric mode.
Learning Skill
Get on
Fold the kickstand, open the power switch
and step on the pedal one foot by one foot.
Handle to
accelerate
.
Turn the accelerator handle down with
right hand, and the motor speed increases.
Release and go back to zero gear.
Go forward
Turn the accelerator handle down with
right hand to accelerate
- 06 -
Rear
brake
Long press the brake button,
release it when slow down
or stop.
Brake
Hold the brake.
Front
brake