- ページ 11

歯科医療機器 Great Lakes MINISTAR SのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Great Lakes MINISTAR S 13 ページ。
Great Lakes MINISTAR S にも：トラブルシューティングと製作のヒント (2 ページ)

Position a 125mm diameter round disc on the spring-

loaded adjusting ring of the pressure chamber.

Align the clamping frame over the material so that the

spring clips slip under the bevel of the locking device

(white arrow) on the sides of the chamber.

Tighten by turning the handle clockwise, so that

the chamber and clamping handles are parallel

(white arrow).

2.) Barcode Scan:

The

Barcode Scanner

automatically enters the

correct processing information for your material.

Scan

Press the

portion of the

(A) to activate the scanner.

For Great Lakes Material:

on an easy-to-scan

Barcode Strip

box of material. Hold the barcode strip under the

scanner until you hear a "beep" indicating the

barcode has been read. The heating time will

automatically show on the display (C).

For Scheu Material:

the barcode is printed

Material

directly on the

(D). Hold the material

under the scanner until you hear a "beep"

indicating the barcode has been read. The heating

time will automatically show on the display (C).

Code/Scan Button

the barcode is located

(B) inside each