ページを印刷するBattery usage:
1.
Auxiliary charge: such as short delivery time, users can directly use the battery.If the delivery time
is longer (2 months or longer), the battery will lose power during storage and transport. It is better
to charge the battery before use. To charge it requires plugging the exclusive charge to the battery
charging hole and connecting AC220V power source for 2~4 hours until the charger is full.
2.
The normal charge of the battery: the operation of R3 is also the discharge process of the battery. The
battery should be charged immediately after the use of the power-assisted vehicle.
3.
Please turn off the power if not riding.
4.
The connectors of the battery box should be fixed tightly according to the requirements (the battery
box connecting line has been reliably connected before ex-factory). Loosened or wrong connection will
cause the related parts abnormal and lead to serious damage.
5.
Lithium batteries can not be close to open fire or high temperature heat source, can not be thrown into
water and can not be exposed in the sun in high temperature season.
6.
Do not disassemble and decompose, as the internal part of them lithium battery has been packaged intactly.
7.
The waste lithium battery of the product is to be recycled by the enterprise or dealer, and the
government designated outlets. Please do not throw away the waste battery, so as not to pollute the
environment.
Charger usage:
1.
Carefully check whether the charger's rated input voltage (AC220V) and the grid voltage is consistent.
2.
When the vehicle needs charging,first connect the battery to the charger, and then connect the charger to
AC power source .The charging indicator is red meaning it is charging. When it turns green, it will take 15
minutes to be fully charged. The charging time is about 2-4 hours (depending on the quantity of remaining
battery).
Matters needing attention in charging:
1.
When charging, please put it in the safe place where children can not touch.
2.
It is not advised to use it when it is not fully charged.
3.
Do not use other brands of chargers, and other brands of batteries are not suitable for the use of the charger.
4.
Do not disassemble, as the charger contains high voltage circuit.
5.
Prevent liquid and metal particles from penetrating into the inside and be aware of falling and impact,
so as not to cause damage during use and storage.
6.
When charging, do not affix any items.
- 10 -