ページを印刷するGet Started
R3/R3+provides riders with three different riding modes.
1.Electricity-assisted mode
Set right the head, fold kickstand and fasten frame. Adjust bike head and saddle position to ensure a
comfortable riding experience. Find the power switch in the one side of the battery, start it and hold the
handle. First sit on the saddle and step on the pedals one foot by one foot. When riders are ready to
ride it, they can push the accelerator in the right handle to accelerate.
Power switch
Open the power switch
Starting is completed.
2. Man-powered mode
Set right the head, fold kickstand and fasten frame. Adjust bike head and saddle position to ensure a
comfortable riding experience. Find the power switch in the one side of the battery, start it and hold the
handle. First sit on the saddle and step on the pedals one foot by one foot. Rides can pedal it to go forward.
3. Power-assisted mode
Turn on the power switch. Power sensor can sense the rotation, and then give signal to the controller
when the riding ring exceeds three rings, so that power-assisted mode is activated. According to
different riders' force, the level of power assistance changes. When braking, it is out of power-assisted
mode. If pedals reverse, it will realize a faster exit of power-assisted mode. The power-assisted mode
is to make riding easier.
R3S does not support pure electric mode.
Learning Skill
Get on
Fold the kickstand, open the power
switch and step on the pedal one foot
by one foot.
Pull down the accelerator with
.
the right hand to speed up and
ride.
Go forward
Right down to move accelerator to
accelerate.
- 07 -
Rear
brake
Accelerator
Long press the brake button,
release it when slow down or stop.
Brake
Front
brake
Hold the brake.