- ページ 7

DJ機材 Great Lighting GLM003のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Great Lighting GLM003 15 ページ。

ページを印刷する

3.5. "Advanced" Interface

The password is "up down up down" for touch operation， and

wheel operation

Process for touch operation：Press "Up" to see the first "*"，and press "Down" key to see the second "*"，and

press "Up" to see the third "*"， and press "Down" key to see the fourth "*"， and last press "Confirm" key to enter

password confirmation.

Turning wheel Operation modes：Turn one bit left to see first "*", and Turn one bit right to see the second "*"，

and turn one bit left to see the third "*", and Turn one bit right to see the fourth "*"，and last press the wheel to

enter password confirmation.

Options

Touch Screen Calibration

Reset Calibration

Lamp Life Hours

Lamp Hours Clear

Back

4. Channels

4.1. Channel table

CHANNEL

COLOUR WHEEL

LIGHT CUTTING/STROBE

DIMMER

GOBO WHEEL

EIGHT PRISM

PRISM ROTATION

INVALID

FROST

Please touch the place according to the prompt of the cross cursor in the

Calibration interface. If the 4 values received the right data, then save the data. If

failed, it will keep repeating. Please press "Confirm" button to stop Calibration

any time.

When enter sub-menu, the reset location of X.Y axis motors is adjustable. It is not

"unit's digit", "ten's digit" or "hundred's digit" or long-time press

able to edit

for

Reset Calibration which needs to be calibrated step by step, which is different

from address code and channel values.

Attention：Please don't conduct Reset Calibration, when the motors are working.

And please reset the fixture before Reset Calibration when necessary.

The lifetime of lamp

Clear the record

Return

password is " left right left right" for turning

Instructions

CHANNEL MODE