電源 ADELSYSTEM CBI-1280 SeriesのPDF マニュアルをオンラインで閲覧またはダウンロードできます。ADELSYSTEM CBI-1280 Series 11 ページ。 All in one dc ups power solutions

ページを印刷する

CBI All in One

DC UPS Power Solutions

CBI All In One UPS Power Solutions combine the requirements for several applications in just one device which can be

used as power supply unit, battery charger, battery care module or backup module. The available power is

automatically distributed among load and battery, while supplying power to the load always is the first priority. The

maximum available current of the load output is two times the value of the device's rated current.

If the device is disconnected from the main power source, the battery will supply the load until the battery voltage

reaches 1.5 V per cell. This prevents the battery from deep discharge. CBI devices provide microprocessor controlled

battery charging. Using algorithms, the battery's condition will be detected and based on that, an appropriate charging

mode is chosen. The real-time diagnostics system will continuously monitor the charging progress and indicate possibly

occurring faults such as elements in short circuit, accidental reverse polarity connection or disconnection of the battery

by the battery fault LED and a flashing code of the diagnosis LED.

CBI All In One UPS Power Solutions are suitable for open/sealed lead acid-, lead gel- and optionally Ni-Cd batteries. By

using the battery-select-jumper, it is possible to set predefined charging curves for those battery types. The available

charging options are recovery-, boost- and trickle charge. All CB devices are built in a rugged metal case with a DIN rail

mounting bracket.

Features:

• Power supply, battery charger, battery care module and backup module in one device

• Three charging modes

• Compact, rugged metal case

• Available in 12VDC, 24VDC and 48VDC

• Suitable for most common battery types

• Adjustable charging current

• Easy battery diagnosis and fault identification either by LED or external devices connected to fault

• Status contacts

• High efficiency up to 91% through switching technology

• Several output protection features such as short circuit, overload, deep battery discharge etc.

• DIN rail mounting

• Small size

• 3 year warranty

138

Load Output

DIN Rail Mounting

Charging Level

Mains LED

Low Battery LED

Diagnosis LED

Battery Start

Push Button

Battery Selection Chart

Battery type

1.2 Ah

Load 1.5 A

Load 3 A

Load 5 A

Load 7.5 A

Load 10 A

Load 12 A

Load 15 A

Load 20 A

For the latest on Altech Power Supply specifications please visit www.altechcorp.com/power.

Battery Charging Output

Monitor Signal

Switch Contacts

Battery Type

Configuration Jumper

AC Input

3.2 Ah

7.2 Ah

12 Ah

200

400

120

240

100