- ページ 8

ホブ Gaggenau CE 261のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gaggenau CE 261 16 ページ。 Glass ceramic cooktop
Gaggenau CE 261 にも：ユーザーマニュアル (16 ページ)

Setting the cooktop

This section familiarises you with how to make

settings on your cooktop. The table contains cooking

methods and examples for the different heat settings.

The main switch is used to switch the cooktop on and

off.

To switch on: touch the # symbol. A signal sounds.

The lamp above the main switch and the ‹ displays

lights up. The cooktop is ready for use.

To switch off: touch the # symbol until the light above

the main switch goes out. All cooking zones are

switched off. The residual heat indicator remains on

until the cooking zones have cooled down sufficiently.

Notes

‒

The cooktop switches off automatically if all

cooking zones have been switched off for more

than 20 seconds.

‒

The settings remain stored for 5 seconds after the

cooktop has been switched off. If you switch it on

again during this time, the cooktop will operate

using the previously stored settings.

The hob must be switched on with the main switch.

Each cooking zone has 9 heat settings.

Heat setting 1 = lowest output

Heat setting 9 = highest output

Select the cooking zone by touching the

respective symbol in the display panel.

Select the required heat setting within 5 seconds.

The selected heat setting lights up in the heat setting

display. A signal sounds to confirm the setting after a

few seconds.

Select the cooking zone and set the required heat

setting.

Select the cooking zone and set to 0. The cooking

zone switches off. The residual heat indicator appears

after approx. 5 seconds.