- ページ 11

ホブ Gaggenau CK 260のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Gaggenau CK 260 12 ページ。 Glass-ceramic hob with superquick cooking zones
Gaggenau CK 260 にも：取扱説明書 (10 ページ)

ページを印刷する

6.3 Installation

Fig. 7

Fig. 8

Fig. 9

– Produce the recess for one or several Vario

appliance(s) in your worktop. Proceed as

indicated on the installation sketch and the

dimension table. The dimension table contains

details of the space requirement for the trim

between the appliances.

Important: the angle between the cut surface

and the worktop must amount to 90° (Fig. 7).

– Mark the centre of the recess exactly. Secure

the longer securing rail on the rear edge and the

shorter securing rail on the front edge of the

recess. Make sure that the lugs of the securing

rail lie on the worktop and that the centre

marking of the securing rail is precisely flush

with the centre marking on the worktop (Fig. 8).

– Lower the appliance into the worktop. Make

sure that the engaging lugs on the appliance

lie exactly on the clamping springs. Press the

appliance firmly into the worktop. The engaging

lugs on the appliance "snap" into the clamping

springs (Fig. 9).

Note: When installing the appliance in granite

or marble worktops, have the holes produced by

a specialist or stick on the securing rails with a

temperature-resistant 2-component adhesive (metal

on stone).

Several appliances can also be installed in indi-

vidual recesses, as long as a minimum clearance of

40 mm is kept to between the appliances.

Note:

Please note that a distance of 10 mm from the

base cabinet must be observed for safety reasons.

When an intermediate shelf is installed, the

distance from the bottom edge of the housing

trough and the shelf or the next combustible

item of furnishing must be at least 50 mm.

5080002673ind03

en 04.03 EB