- ページ 8
シード選手 GREAT PLAINS BD7600のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。GREAT PLAINS BD7600 20 ページ。 Box drill
GREAT PLAINS BD7600 にも： フィールド調整マニュアル (12 ページ)
ページを印刷する
6. Tap each blue field and input the desired values.
Refer to "Required System Inputs" on page 7
for more information.
Please Note: After you tap the blue field and
i
input
the
automatically saves the updated information.
Please Note: Each Product Profile must have
i
a unique name in the Renaming Field.
Single Box Hoppers: Skip to step 9.
7 . On Split-Box Hoppers: Once the required
system inputs have been entered, you must
assign a metering system to the product profile.
Tap
soft key to select the metering system.
Please Note: This soft key will toggle
i
between metering system 1 and metering
system 2. The selected metering system will
be displayed near the calibration factor.
Shown below.
Great Plains | 195-835QS | 03/25/2022
desired
value,
the
8. Confirm the metering system selection before
continuing. Metering System 2 selection shown
below.
9. Tap
system
Required System Inputs
The required system inputs within the Product
Database menu are:
Renaming
Product Type
Target Rate
Target Rate Increment
Calibration Factor
Metering System Selection (Split-Box Hoppers Only)
Please Note: Tap the blue field and input the
i
desired value for each field, the system
automatically saves the updated information.
BD7600 Quick Start Guide
soft key for Product Database menu.
7