- ページ 6

セキュリティシステム ADEMCO TI110B1のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ADEMCO TI110B1 18 ページ。 Gsm/pstn dual network burglar alarm system

SIM card. The telephone number "XXXXX...X" will receive such a message: "Techwell

Electronic Technology Co., LTD (Alarm location) -------Disarm (Status)", which means that the

alarm panel has been disarmed successfully. (Note: 3456---remote operation password;

8----function code; XXXXX...X----cell phone number)

GSM Module Alarm Dispose

11.

When alarming, the "Dialing" indicator on the keyboard will not glitter. The alarm panel will

inform all the alarm receiving numbers in form of SMS with the content of alarm zone and alarm

type first. And then it will dial the alarm receiving numbers in order and circulately and reply the

alarm languages. After replaying the alarm language, the alarm panel will listen-in the locale. If

you want to stop the listen-in in advance, you can hang your cell phone off immediately, and the

alarm panel will not dial this number. And if you want to have more listen-in time, you can press

"9999" after hearing the indicator voice. You are allowed to disarm the alarm panel by inputting

"7777" during listen-in.

Ⅳ.Fixed Telephone Program and operation:

Fixed telephone alarm receiving overview

dial the alarm receiving numbers to send the alarm voice notification out (Note: the GSM

auto-dial will not dial the numbers stored in the GSM SIM card when the fixed telephone

works well). And meantime please note that you make sure that the "Edit " switch be turn on

before starting programming.

1. Operation Notice

(1) Turn on the "Program" switch, and simultaneously the screen displays "Program" with the

" Program " indicator shining, and then you can start operating programming item. On

finishing the program task every time, please press "

(2) After all the program tasks have been completed, please turn off the "program" switch.

Otherwise, the alarm panel will not work normally.

(3) The "Program" switch is turned on, and if you do not operate any program task or forget

to turn off the switch within 30 seconds, the alarm panel will give "di" prompt voices,

which remind you to turn off the "program" switch or do continuous operation.

2. Set the current time (24-hour system)

(1) With the perpetual calendar, the alarm panel can automatically calculate and display

odd/lesser month, leap month/year and week.

(2)The procedure to input the current time (24-hour system): Year—week—month—date—

hour—minute. Every item should be input with double-digit number, and if it is not double

digits, please add "0" ahead. For example, this month is February, and you are required to

input "02"

Demonstration: supposing the current time is 8:30, Wednesday, 15

Operation steps: press the key "

: when alarming, the fixed telephone will

Reset

", and then input

Reset

" key for next operation.

, February, 2006