ページを印刷する
i ¸ ,,,,_
m
U
Disassemble box and remove the cardboard packaging that is not beneath the treadmill. Do not attempt to
lift the treadmill at this time. Remove plastic wrap from console masts.
*NOTE:
During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in
before completely tightening any ONEbolt. A light application of grease may aid in the installation of hardware.
Any grease, such as lithium bike grease is recommended.
H_RD_/_[_ ° B_(_ f CONTEHTS
:
SCREW (A)
25mm
Qty:6
A
B
C
OpenHARDWARE B AG L
SlideLEFT CONSOLE MAST BOOT
overMAINFRAME BRACKET.
Insert3 SCREWS ( A)on the bottom
outsideof the mast boot
andsecure.
D Repeat on other side.
BOLT(B)
15mm
Qty:6
SPRING WASHER (C)
8.2 mm
Qty: 6
ARCWASHER (B)
8.2 mm
Qty: 6
LEAD WiRE
BOLTS (B)
SPRING WASHER (C)
ARC WASHER (B)
MAiNFRAME BRACKET
A
B
C
D
PuffLEAD WIREthroughRIGHT
CONSOLE MAST. A fterpulling the
LEAD WIREthroughthe mast, the
top of the CONSOLE W IREshould
be locatedat the top of the mast.
Detachand discardLEADWIRE.
OpenHARDWARE B AG2.
Slide RIGHT CONSOLE MAST over
MAINFRAME BRACKET.
*Note: Donot pinch CONSOLE
CABLES whenplacing the mast onto
the main frame.
Insert3 BOLTS (B) on the bottom
outsideof the mast and securewith
3 SPRING WASHERS (C) and 3 ARC
WASHERS (D).
E Repeat on other side.
i
iii_ i
_i i ii _ i _ ! !i i I _ i _!i _ii!
2.0AT
Rev.l.9.indd
8-9
3/3/08
11:12:18AM