- ページ 9

コントロールユニット Automated Logic M220NXのPDF テクニカル・インストラクションをオンラインで閲覧またはダウンロードできます。Automated Logic M220NX 9 ページ。

Table 5. LED Signals (Continued)

Run LED

Error LED

5 flashes

Off

per second

7 flashes

per second

14 flashes

per second

Power - indicates power is being supplied to

the module.

Rx - lights when the module receives data

from the CMnet.

Tx - lights when the module transmits data

over the CMnet.

Digital Output Status - lights when the digital

output is activated.

Protection

The M220nx module is protected by internal

solid state Polyswitches on the incoming

power and CMnet. These Polyswitches are

not replaceable and will reset themselves if

the condition that caused the fault returns to

normal.

To determine when a module was

manufactured, check the module status

report for the module in SuperVision. Refer to

the SuperVision User's Guide for more

information about the module status report.

A sticker on the back of the module also

shows the date the module was

manufactured. The first three characters on

the sticker indicate the type of module. The

next three characters show the year, month,

and week of manufacture. (The month digit is

in hexadecimal.)

Revised 4/3/00 • M220nx

Condition

Firmware transfer in

progress

Ten second recovery

period after brownout

Brownout