コントロールユニット AutomationDirect CLICK C0-08SIMのPDF マニュアルをオンラインで閲覧またはダウンロードできます。AutomationDirect CLICK C0-08SIM 3 ページ。 Expansion i/o module

ページを印刷する

C0-08SIM CLICK Expansion I/O Module

Please read and understand the information in this

insert prior to installation, operation, or servicing

this equipment.

Please refer to the CLICK User

C0-08SIM

CAUTION

The C0-08SIM unit toggle switch can get hot

when mounted in a hot environment. Wear

appropriate personal safety equipment before

use, to avoid possible burns.

General Specifications

Operating Temperature

Storage Temperature

Relative Humidity

Environmental Air

Agency Approvals

+ Keep out iron powder, moisture, oil or chemicals. Isolate from shock or vibration, direct sunlight, and from electric or ferromagnetic field.

* Meets EMC and Safety requirements. See the Declaration of Compliance for details.

Input Specifications

Inputs per Module

OFF to ON Response

ON to OFF Response

Logic Side (8 points, green LED)

Status Indicators

Power Indicator (green LED)

Bus Power required

www.automationdirect.com/click-plc

Manual

(https://cdn.automationdirect.com/static/manuals/

c0userm/c0userm.html).

General Safety

In this Insert Sheet, the safety instruction levels are classified into "WARNING" and "CAUTION"

WARNING

CAUTION

• Don't use this equipment in a flammable or explosive environment in order to avoid accidental injury or fire.

• You should use external electromechanical devices that are independent of the PLC (Programmable Logic

Controller) system to provide protection for any part of the system. Otherwise, malfunction or output

failures may result in a hazardous accident.

• When using this product, connect it to the Click CPU unit.

• Please ensure that you earth the Ground terminal of the Power Units for CLICK CPU (C0-00AC/01AC) to

avoid electric shock or equipment damage during a short circuit.

• Don't operate the equipment with a nonconforming external power supply to avoid electric shock,

equipment damage or fire.

• Don't intentionally fault wiring, as this may result in equipment damage or fire.

• To avoid electric shock or malfunctions that might result in an accident, don't touch any terminal while the

PLC power is on.

• Don't put metals (e.g. Screwdriver) into radiator holes, drop trash or foreign objects (e.g. wire cut-offs) into

the device, in order to avoid electric shock or equipment damage.

• If the equipment is used in a manner not specified by the manufacturer, the protection provided by the

equipment may be invalidated.

• Use and store the equipment in an environment described in the specifications (regarding temperature,

humidity, vibrations, shock, etc.) in order to avoid equipment damage or fire.

• Ensure all wiring has strain reliefs in order to avoid damage to insulation which might result in electric shock

or fire.

• Ensure secondary external power circuits are only live after PLC control program is started. Otherwise a

malfunction or output failure may result in a hazardous accident.

• Don't block the radiator holes. This may cause an increase of internal temperature resulting in equipment

damage or fire.

• Don't disassemble or modify the equipment so as to avoid electric shock, equipment damage, or fire.

• Cut off all phases of the external power source prior to performing maintenance work, thus avoiding electric

shock or equipment damage.

32° to 131°F (0° to 55°C)

-4° to 158°F (-20° to 70°C)

30% to 95% (non-condensing)

No corrosive gases permitted (Level 2 environmental pollution)

UL61010-2-201

CE (EN61131-2):2007*;

RoHS (2011/65/EU) and amendment (EU) 2015/863

8 Toggle switches

Max. 140ms, Typ. 90ms

Max. 110ms, Typ. 60ms

Max. 50mA (All points ON)

(C0-USER-M)

for

Please follow the instructions below for personal and operational safety.

Assumes that incorrect handling may cause hazardous conditions, resulting in

severe injury or death.

Assumes that incorrect handling may cause hazardous conditions, resulting in

medium or slight injury, or may cause equipment damage.

WARNING

CAUTION

CLK-1

CLICK Module Insert

3505 HUTCHINSON ROAD

information

CUMMING, GA 30040-5860

1-800-633-0405