- ページ 3

産業機器 DBI SALA Anchor on the GoのPDF 据付・取扱説明書をオンラインで閲覧またはダウンロードできます。DBI SALA Anchor on the Go 20 ページ。 Portable roof anchor for metal roofs

GENERAL USE WARNINGS

VISUALLY INSPECT TEMPORARY ANCHOR PRIOR TO, AND

FOLLOWING EACH USE, TO ENSURE IT IS IN A SERVICEABLE

CONDITION (refer to section 5.1). IF IN DOUBT, REMOVE FROM

SERVICE IMMEDIATELY.

INSTALLATION AND USE OF THIS PORTABLE ROOF ANCHOR

MUST BE PERFORMED BY, OR UNDER THE SUPERVISION OF A

COMPETENT PERSON.

DO NOT ATTACH OR USE TEMPORARY ROOF ANCHOR WITHOUT

FIRST

READING,

UNDERSTANDING

FOLLOWING

THESE

INSTRUCTIONS.

DO NOT USE THE PORTABLE ANCHOR FOR ANY PURPOSE OTHER

THAN FOR WHICH IT HAS BEEN DESIGNED.

PRIOR TO COMMENCEMENT OF WORK, PLEASE ENSURE THAT

YOU HAVE READ AND COMPREHENDED THE DETAIL REFERRING

TO POSITIONING OF THE ANCHOR AND THE APPROPRIATE SAFE

WORK AREA.

THIS TEMPORARY ANCHOR POINT MUST BE SUBJECTED TO A

DOCUMENTED INSPECTION EVERY 12 MONTHS BY A COMPETENT

PERSON.

This is a Temporary Anchorage device that

has been designed as a

component of a personal fall arrest system and is for use only where

there are no other practical means of connection or work practice.

Relevant State or national legislation may impose obligations to provide

safe systems of work. To discharge these responsibilities, conduct hazard

identification and risk assessment with reference to the hierarchy of

control of risks. Refer to your local State or Federal guidelines or Code of

Practice for safe work on roofs for more details.

Anchors must be properly installed prior to the operator attaching to

them and then used according to requirements contained in this manual.