- ページ 5

温度計 iHealth PT1のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。iHealth PT1 10 ページ。 Clinical digital thermometer

(3) Monitor Mode

The thermometer could be used orally, rectally or axillary.

To enter Monitor Mode, make sure the thermometer is in the

OFF mode, press and hold the button for 5 seconds, beep will

sound when activated.

Then follow the measurement procedures as usual, the results

will display in 3 minutes.

(4) Recall Function

Make sure the thermometer is in the OFF mode. Hold the button

until the last measurement result displays on the screen

(approximately 10 seconds).

(5) When measurement is completed

1. When the measurement is completed, 2 beeps will sound for 3

times when the results is less than 99.5℉(37.5℃) , otherwise 4

beeps will sound for 3 times.

2. When the measurement is completed, "℉" sign will stop

ashing with backlighting.

3. The thermometer will power o automatically 30 seconds after

the last measurement is completed.

4. If no more measurement is required, press and hold the on-o

button to power o manually to save batteries power.

Possible Reasons For Measurement Failure

The thermometer falls during the measurement.

The environmental temperature doesn't meet the requirements.

The subject temperature is beyond measurement range.

Please power o the thermometer and wait for 1 mins for

remeasurement.

Unit Switching

1. Make sure the thermometer is in the OFF mode.

2. Hold the button until ONLY ℃ and ℉ symbols ash on the

right corner of the screen (approximately 8 seconds). Then

release the button immediately.

3. Brie y press the button to select the measurement unit you

prefer.

4. Once the selected unit symbol ashes on the screen, hold the

button until the unit symbol stops ashing (approximately 8

seconds), then release the button, the thermometer will power

o automatically.

BEEP BEEP～

BEEP BEEP BEEP BEEP～