- ページ 7

コントローラー Agrox RTU5015のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Agrox RTU5015 12 ページ。 Gsm gate opener remote switch

number or check the input is in ENGLISH INPUT METHOD and CAPS LOCK.

13. The SMS commands that you will certainly use in the GSM Gate Opener are the following:

6.1 Setup New Password

pwd#PWDnewpassword#PWDnewpassword#

if successful, the unit will return:

For example, the original password is 1234, you want change it to 6666, then you can send the command

below:

1234#PWD6666#PWD6666#

6.2 Setup Authorized number

pwd#TELAuthorized Number#Serial Number#

E.g.: if you want to setup 13570810254 as the first user number, and the password is 1234,then you can

send

1234#TEL13570810254#01#

Tips:

1. the authorized number means the one who can dial the RTU5015 unit to open it.

2.We strongly recommend that the serial number of 01 and 02 are cellphone number, because of

the alarm message only send to the first and second position numbers;

3. The Serial Number is the position to store the authorized number, from 01~64.

6.3 Inquiry the Serial Number's Authorized number

pwd#TELSerial Number？

E.g.: If you want to know the authorized number at position 2, and the password is 1234,then you can

send 1234#TEL02？to check it.

6.4 Remove the Authorized Number

pwd#TEL#Serial Number#

( or you can overwrite with another number you wish to change it).

E.g.: if you want to remove the authorized number at position 12, and the password is 1234, then you can

send

1234#TEL#12#

6.5 Disable the digital inputs (Default is disable)

pwd#DA#

Tips:

if you want to use the digital inputs, please enable it firstly.

6.6 Enable the digital inputs

pwd#EA#

Tips:

if you enable the digital inputs function, the sensors will enter Armed status after 10minutes of the

latest dial-in. in the first 10minutes, when the sensor triggered, will not alarm, after 10minutes, the unit in

armed mode, when any sensor triggered, will start the siren (if you connected) or switch on the light(if you

connect it) and send SMS to the Position 01 and 02 authorized numbers immediately.

This function is very useful for garage or other applications. It can protect the assets for you by GSM

Network.

Password modified

to the RTU5015 unit.

Page 7 of 7 Ver 1.3

OK.

File No.:RTU501513