- ページ 11

シャワーキャビン Coram Showers OPTIMA SeriesのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Coram Showers OPTIMA Series 16 ページ。

a: Place the bottom rail onto the tray with its end mouldings inserted into the corner post and wall channel.

b: Centre the bottom rail between the corner post and wall channel so that there is an equal gap at each end.

Push fit the 'short flipper seals' onto the top and bottom

edges of the fixed panel - flush against the metal profile.

Ensure the flipper seal 'flaps' are on the inside of the

fixed panel.

Note: Wetting the glass with water will help to fit the seals.

Outside face

of fixed panel

Outside

face of

fixed

panel

Position the fixed panel into the required corner post/

wall channel and slide down so it fully slots onto the end

moulding of the bottom rail. Inside the enclosure, ensure

the panel sits in the 'fixed panel bracket', slide the bracket

along the rail and position under the panel as shown.

Fixed

panel

bracket