ページを印刷する7
CLEANING AND MAINTENANCE
Clean the Pre-filter & Filter Sponge & Exhaust HEPA
Press the dust cup release
1
button and turn counterclock-
wise to remove the dust cup.
Rotate the post-filter counter-
3
clockwise.
Clean the pre-filter, filter sponge,
5
and post-filter under water.
15
After taking out the dust cup,
2
take out the pre-filter and filter
sponge.
4
Remove the post-filter upwards.
Air dry them for at least 24
6
hours before using them again.
CAUTION:
If you find that the suction is weak or the "Suction Blockage Indicator"
flashes, then please wash the filter.
Assemble the pre-motor filter, filter sponge, and post-motor filter back in
7
place. Do not assemble them until completely dry.
wet
wet
≥140°F
on the LED screen
dry
dry
16