- ページ 3

扇風機 AirFiciency CF60EのPDF マニュアルをオンラインで閲覧またはダウンロードできます。AirFiciency CF60E 4 ページ。 Heavy duty industrial ceiling fan

Figure 3

Once all electrical work has been done,

position the wiring back up into the ceiling

outlet box.

Lift and set the hanger ball into the mounting

plate socket by aligning the groove in the

hanger ball with the tab on the mounting

plate socket as shown in Figure 3.

Slide bell up to mounting plate and rotate to

align locking slots in bell with canopy screws.

Secure bell to mounting plate with canopy

screws. Lightly tighten the bell screw that

snugs the bell to the down-rod.

Bolts, flat washers, and fiber pads for attaching blades are located on the motor housing.

Brackets come already installed on blades.

Remove bolts and washers from fan motor.

Leaving fiber pad in place on motor housing, set blade bracket over holes and reinstall the bolts and

washers in their original holes as shown in figure 4. Tighten into motor housing. Do not over tighten.

Mounting continued

Hanger ball

Canopy screw

Alignment

groove

Bell screw

Attaching Blades

Figure 4

Bolts

Lock Washers

Flat Washer

Blade

Blade Bracket

Fiber Pad

Figure 3

Bell

Install fan blades based on

the direction of airflow you

intend to utilize the most.

For downward air flow

For upward air flow

All blades MUST face the

same direction.

Canopy screw

Mounting plate

socket

Alignment tab

Down-rod