- ページ 4

ペットケア製品 GAMMA2 nanoのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。GAMMA2 nano 12 ページ。 Automated pet feeder

ページを印刷する

section 3:

custom meal programming

program meal time

1) Press "MEAL TIME" button

a) The MEAL TIME LED will illuminate. A MEAL TIME counter will appear in

the bottom left. It will be flashing "1".

b) Press ENTER to begin programming MEAL TIME #1

2) Press ENTER to edit displayed MEAL TIME

a) LCD display goes into MEAL TIME set mode

b) AM/PM segment flashes (12-hour clock mode)

Note: If a PRESET MEAL option was previously selected, it will start as your meal schedule. If a PRESET MEAL was not selected, the DEFAULT MEAL SETTINGS will

start as MEAL #1 and MEAL #2.

IMPORTANT: Pressing the "MEAL TIME" button in the middle of setting will exit MEAL TIME programming, WITHOUT saving any changes. If no keys are

pressed in 30 seconds, MEAL TIME programming will end WITHOUT saving any changes.

program meal size

1) Press "MEAL SIZE" button

a) The MEAL SIZE LED will illuminate

b) LCD display goes into meal size set mode. It will be reflected as Ounces

or Grams depending on what setting it is currently on.

2) Select desired MEAL SIZE

a) Press UP or DOWN arrow to adjust weight of food dispensed

b) Press ENTER to confirm

IMPORTANT: Pressing the "MEAL SIZE" button in the middle of adjusting the setting will exit Meal Size programming, WITHOUT saving any changes. If no

keys are pressed in 30 seconds, Meal Size programming will end WITHOUT saving any changes.

Note: MEAL SIZE can be increased or decreased by increments of 2.5 Ounces or 7 Grams.

3) Select AM/PM

a) Press UP arrow to select AM

b) Press DOWN arrow to select PM

c) Press ENTER to confirm

4) Select HOURS

a) Press UP or DOWN arrow to adjust hours

b) Press ENTER to confirm

5) Select MINUTES

a) Press UP or DOWN arrow to adjust minutes

b) Press ENTER to confirm. This will complete MEAL TIME #1.

6) To Program an additional MEAL TIME

a) Press "MEAL TIME" button to re-enter programming

b) The MEAL TIME counter will be flashing "1"

c) Press UP arrow to select MEAL TIME #2

d) Press ENTER to begin programming

e) Repeat steps 2-5 to program an additional MEAL TIME

f) Repeat this process for as many meal times desired (up to 6)