- ページ 19

アクセサリー Jalousie-Welt Pergola PROのPDF 操作およびメンテナンス、出荷、開梱および設置に関する説明書をオンラインで閲覧またはダウンロードできます。Jalousie-Welt Pergola PRO 20 ページ。

3.8.9. Couple of handle (only manual drive)

Awnings handle into the loop of the gearbox. By turning the handle can open or close the awning.

Awning fabrics must be roll up on the right side (from top) otherwise it can damage the sheathing and

the awning.

3.8.10. Check the awning after installation

After installation, check items from the list below:

Operation (manual or electric).

Stability.

Proper operation of limit switches.

3.8.11. Training and instruction of the enduser before awning in use

Installation team must fully inform the end user about safe use of the awnings.

3.8.12. Handing over all the necessary instructions and warranty the enduser and pass the awning

for use

After assembly, the person in charge of the installation team must sign The handing over protocol/Waranty.

According to knowledge of local conditions and after completion of the assembly, installation team declares

the user whether the manufacturer's wind class was achieved. If not, the installation company must to

document the actual achieved wind class rating.

The handing over protocol/Waranty must be countersigned by the user and installation team.

After assembly the following instructions must be passed to enduser:

Installation manual,

Service and maintenance manuals and warranty (with wind class of the awning),

Settings (only for motor drive),

Sun and wind automatic instruction (only for awning with automatic),

Remote Control Guide (only remote controled awnings),

Handing over protocol/Waranty.

3.9.

Repair the awning

Repairs should be carried out only by a specialist. Only spare parts from DRAGON.

can be used.

3.9.1. Replacement a drive

In order to make a repair to a defective drive, the awning must be using a belt secured. All the necessary

work can be made only by a specialist. The drive must be the same series and by the same manufacturer

are.

3.9.2. Replacement of the sheathing

For this action must be the awning removed. The change must be made by an authorized dealer or the

awning must be sent to the manufacturer to replace the sheathing.

3.9.3. Replacement of the components

The change must be made by an authorized dealer or the awning will be sent to the manufacturer to replace

the item.

page: 19 / 20