- ページ 4

試験装置 Gamry LPI1010のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Gamry LPI1010 5 ページ。 Load/power supply interface high voltage eis test system

Con�gure the Hardware Settings of your Electronic Load or Power Supply

1) Ensure that the DUT is not connected to anything.

2) Verify that the output of your electronic load or programmable power supply is set to zero.

3) Turn on your electronic load or programmable power supply.

4) Set the operation mode ExternalCurrentControl.

5) Set the full-scale current on your electronic load or programmable power supply to accommodate

the maximum desired current.

Con�gure the Framework Settings for your Electronic Load or Power Supply

1) Ensure that your LPI1010 is plugged into the Interface 1010 instrument and the LPI1010 is powered.

2) Power on your Interface 1010 and ensure that its USB port is connected to your computer.

3) Start the Gamry Instrument Manager from either the Start menu or from within the Framework™

software by selecting Options > Instrument Manager... on the Framework Menu.

4) Click on the potentiostat that is connected to the LPI1010. Check if any software updates are required.

5) Press the Con�gure button to open the LPI Con�guration Entry.

6) Correctly enter all parameters in the LPI Con�guration Window for your Electronic Load or Power Supply

in use and press OK.