- ページ 10

レンジ KitchenAid 36"のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。KitchenAid 36" 16 ページ。 30” and 36” gas sealed burner glass cooktops
KitchenAid 36" にも：インストレーション・インストラクション (5 ページ)

ページを印刷する

3-Wire Cable from Home Power Supply

IMPORTANT: Use the 3-wire cable from home power supply

where local codes permit a 3-wire connection.

A. Cable from home power supply

B. Junction box

C. Black wires

D. White wires

E. Green (or bare) ground wire

(from range)

1. Connect the 2 black wires (C) together using a UL listed wire

connector.

2. Connect the 2 white wires (D) and the green (or bare) ground

wire (E) (of the range cable) using a UL listed wire connector.

3. Connect the 2 red wires (G) together using a UL listed wire

connector.

4. Install junction box cover.

F. 4-wire flexible cable from

range

G. Red wires

H. UL listed wire connectors

I. UL listed or CSA

approved conduit

connector

Attach Backguard or Island Trim

WARNING

Excessive Weight Hazard

Use two or more people to move and install range.

Failure to do so can result in back or other injury.

1. Using 2 or more people, move range close to cabinet

opening.

2. Remove cardboard or hardboard from under range. Move

range into its final location.

3. Attach the backguard or island trim as required for your

installation. See "Tools and Parts." Attachment screws are

included in the literature package.

Attaching the Backguard

A. Three front screws (4 rear screws required but not shown)

Attaching the Island Trim

A. Center hole not used

4. Using 2 or more people, tip the range back so that the front

feet lift off the ground. Slide range toward the wall until the

rear brace is under the anti-tip bracket. Stand range up,

making sure the anti-tip bracket catches the rear brace.